- Pallets
-
Operating and warehouse equipment
- Cabinet systems
-
Tool storage
- ®RasterPlan perforated panels
- ®RasterPlan accessories
- LogoChart®
- ABAX® tool holder
- ®RasterPlan / ABAX® tool holder assortments
- ®RasterPlan / ABAX® perforated panels starter sets
- ®RasterPlan slotted panels
- ®RasterPlan storage viewing boxes for slotted panels
- ®RasterPlan slotted panels starter sets
- ®RasterPlan slotted panels accessories
- ®RasterPlan tool holder
- ®RasterPlan slotted panel sets / wall rails
- ®RasterPlan workbench uprights and wall rails
- ®RasterPlan partition walls
- ®RasterPlan partition walls
- RasterMobile®
- ®RasterPlan boltless shelving
- Floor marking and floor repair
- Lifting devices and gear
- Container
- Packaging
- Load securing
- Occupational safety
Filter products
Tool storage
ABAX® tool clamp single small base plate diameter 19 mm aluminium colours
ABAX® tool clamp with small base plate The ABAX® tool clamp with a diameter of 19 mm in aluminium colour is an advanced and fully compatible extension of the well-known ®RasterPlan tool holders. This innovative solution enables the ®RasterPlan tool holder to be connected to all Kappes products with the ®RasterPlan system perforation in a matter of seconds and without tools. Advantages of the ABAX® connection Positive locking and securing are achieved by hooking in and fixing the ABAX® connection and pressing on the locking pin. The connection can be released and reused without tools by simply pulling out the locking pin. Enables quick and flexible positioning of ®RasterPlan tool holders. Features and benefits Available in two colours: Aluminium colours and anthracite grey. Tool-free assembly for easy and safe handling. Maximum flexibility thanks to tool-free disassembly. GS-tested tool holder system for maximum safety and reliability. Experience the strong combination of ®RasterPlan and ABAX® and benefit from a system that makes your working environment more efficient.
- Länge: 45.00
- Farbe in RAL: alufarben
- Breite: 25.00
- Höhe: 60.00
ABAX® Tool clamp single small base plate diameter 6 mm anthracite grey
ABAX® tool clamp: efficiency and flexibility The ABAX® tool clamp with a small 6 mm diameter base plate in anthracite grey is an advanced extension of the tried and tested ®RasterPlan tool holder. This innovative solution enables the ®RasterPlan tool holder to be connected to all Kappes products with ®RasterPlan system perforations in seconds and without tools. Seamless integration and securing Positive locking and securing is achieved by hooking in and fixing the ABAX® connection. Simple pressure on the locking pin ensures additional stability. For flexible use, the ABAX® connection can be released and reused without tools by simply pulling out the locking pin. Advantages for the user Tool-free installation: Quick and easy installation without additional tools. Easy handling: User-friendly and safe to use. Maximum flexibility: Easy repositioning of the tool holders. GS-tested: Tested system for maximum safety and reliability. Choice of colours and design The ABAX® tool clamp is available in two order colours: aluminium and anthracite grey, which can be seamlessly integrated into existing systems. Experience the strong combination of ®RasterPlan and ABAX® for optimised tool organisation.
- Länge: 25.00
- Farbe in RAL: anthrazitgrau
- Breite: 25.00
- Höhe: 60.00
ABAX® tool holder for self-drilling Width 390 mm x depth 58 mm Aluminium colours
ABAX® tool holder: Innovative system for industrial applications The ABAX® tool holder for self-drilling offers a width of 390 mm and a depth of 58 mm in aluminium colours. This system is an advanced and fully compatible extension of the established ®RasterPlan tool holders. Advantages of the ABAX® connection Tool-free connection in seconds with all Kappes products that use the ®RasterPlan system perforation. Easy mounting and fixing thanks to the ABAX® connection with locking pin. Tool-free removal of the locking pin for flexible reuse. Flexibility and safety The ABAX® system offers maximum flexibility thanks to tool-free disassembly and enables the ®RasterPlan tool holders to be positioned quickly and flexibly. The GS-tested quality guarantees safe handling. Organisation colours Aluminium colours Anthracite grey Summary The combination of ®RasterPlan and ABAX® offers a strong, reliable connection that has been specially developed for industrial applications. Benefit from the simple installation and high flexibility of this system.
- Länge: 55.00
- Farbe in RAL: alufarben
- Breite: 390.00
- Höhe: 150.00
ABAX® Tool holder for MK-2 15 x diameter 17 mm anthracite grey
ABAX® tool holder for MK-2 The ABAX® tool holder with the dimensions 15 x diameter 17 mm, width 395 mm, depth 60 mm and height 85 mm in anthracite grey is an innovative extension of the tried and tested ®RasterPlan tool holder. Compatibility and flexibility Thanks to the ABAX® connection, ®RasterPlan tool holders can be combined in seconds and without tools with all Kappes products that have ®RasterPlan system perforations. The secure connection is made by hooking in and fixing with a locking pin, which can simply be pulled out to release and reuse the connection. Advantages of the ABAX® connection Tool-free assembly Simple and safe handling Maximum flexibility thanks to tool-free disassembly GS-tested tool holder system Choice of colours The tool holder is available in two colours: aluminium and anthracite grey. Conclusion The combination of ®RasterPlan and ABAX® offers a strong and versatile solution for the flexible positioning of tool holders. Benefit from the easy handling and high flexibility that this system offers.
- Länge: 70.00
- Farbe in RAL: anthrazitgrau
- Breite: 395.00
- Höhe: 110.00
ABAX® Tool holder for MK-3 12 x diameter 23 mm anthracite grey
ABAX® tool holder for MK-3 The ABAX® tool holder for MK-3 offers an innovative solution for extending the ®RasterPlan system. With a size of 12 x diameter 23 mm and dimensions of 395 mm x 60 mm x 85 mm in anthracite grey, this tool holder is ideal for industrial applications. Advantages of the ABAX® connection Quick and tool-free connection: The ABAX® connection enables assembly in seconds with ®RasterPlan tool holders and Kappes products. Positive locking and security: Once the connection has been hooked in, it is secured by pressing on the locking pin, which ensures a secure connection. Reusability: The connection can be released and reused by simply pulling out the locking pin. Flexibility and adaptability The ABAX® tool holder enables quick and flexible positioning of the ®RasterPlan tool holders, offering maximum flexibility. Tool-free disassembly makes it easy to adapt to changing requirements. Product features Available in two order colours: Aluminium colours and anthracite grey. GS-tested tool holder system for maximum safety. Simple and safe handling thanks to tool-free assembly. Experience the strong combination of ®RasterPlan and ABAX® for optimised tool organisation in your company.
- Länge: 60.00
- Farbe in RAL: anthrazitgrau
- Breite: 395.00
- Höhe: 85.00
ABAX® Drill / hexagon socket holder For 28 parts Anthracite grey
ABAX® drill / hexagon socket holder: efficiency and flexibility The ABAX® drill / hexagon socket holder offers an innovative extension to the proven ®RasterPlan tool holder system. With a width of 390 mm, depth of 30 mm and height of 35 mm in anthracite grey, it is the ideal solution for efficient workshop organisation. Seamless integration with ®RasterPlan Thanks to the ABAX® connection, ®RasterPlan tool holders can be connected to all Kappes products with ®RasterPlan system perforations without tools and in a matter of seconds. Positive locking and securing is achieved by fixing the connection and pressing on the locking pin. This technology enables secure and stable fastening. Tool-free assembly and disassembly The tool-free assembly and disassembly of the ABAX® system offers maximum flexibility. The connection can be easily released and reused by simply pulling out the locking pin. This enables quick adjustment and repositioning of the tool holders. Colour options and safety certification The ABAX® drill / hexagon socket holder is available in two order colours: aluminium and anthracite grey. The GS-certified tool holder system guarantees easy and safe handling, making it the ideal choice for industrial applications. Advantages for the user Tool-free assembly for quick adjustments Maximum flexibility thanks to easy disassembly Secure and stable fastening Seamless integration with ®RasterPlan Available in attractive standard colours Experience the strong combination of ®RasterPlan and ABAX® for optimised workshop organisation.
- Länge: 40.00
- Farbe in RAL: anthrazitgrau
- Breite: 390.00
- Höhe: 60.00
ABAX® tool holder for self-drilling Width 110 mm x depth 58 mm Aluminium colours
ABAX® tool holder for self-drilling The ABAX® tool holder with dimensions of 110 mm width x 58 mm depth in aluminium colour is an advanced extension of the proven ®RasterPlan tool holder. It offers seamless compatibility with all Kappes products that utilise the ®RasterPlan system perforation. Innovative connection technology The ABAX® connection enables tool-free assembly in a matter of seconds. Once it has been hooked in, it is secured by fixing the ABAX® connection and pressing on the locking pin. This connection can be easily released and reused by simply pulling out the locking pin. Flexible positioning ABAX® enables the ®RasterPlan tool holders to be positioned quickly and flexibly. This ensures maximum flexibility and easy customisation to individual requirements. Advantages for users Two order colours: Aluminium colours and anthracite grey Tool-free assembly for easy handling Maximum flexibility thanks to tool-free disassembly GS-tested tool holder system for safety and reliability Conclusion ®RasterPlan and ABAX® offer a strong combination that impresses with its simple and safe handling. Optimise your workshop with this innovative system and benefit from its fast and flexible use.
- Länge: 55.00
- Farbe in RAL: alufarben
- Breite: 120.00
- Höhe: 150.00
ABAX® Screwdriver holder For 12 parts Anthracite grey
ABAX® screwdriver holder for 12 parts The ABAX® screwdriver holder offers an innovative solution for organising your tools. With a width of 390 mm, a depth of 30 mm and a height of 40 mm in anthracite grey, it is an ideal addition to the ®RasterPlan system. Technical features Compatible extension of the ®RasterPlan tool holders Tool-free connection in seconds Secure fixing by hooking in and pressing on the locking pin Reusable ABAX® connection by simply pulling out the locking pin Flexible positioning and customisation Advantages for users Increased flexibility thanks to tool-free disassembly Easy handling and safe application Available in two order colours: Aluminium colours and anthracite grey GS-tested tool holder system Efficient organisation and safety The ABAX® screwdriver holder enables efficient organisation of your tools and guarantees maximum safety thanks to the GS-tested system. The tool-free assembly and disassembly saves time and offers maximum flexibility in the working environment. Conclusion With ABAX® and ®RasterPlan you create a strong connection for optimised tool organisation. Benefit from the easy handling and flexibility offered by this system.
- Länge: 40.00
- Farbe in RAL: anthrazitgrau
- Breite: 200.00
- Höhe: 60.00
ABAX® Hexagon socket holder For 9 parts Anthracite grey
ABAX® hexagon socket holder: Efficient tool organisation Product details The ABAX® hexagon socket holder is designed for 9 parts with diameters from 2 to 11 mm and measures 200 mm in width, 25 mm in depth and 70 mm in height. Available in anthracite grey, this holder offers an innovative extension to the tried and tested ®RasterPlan tool holders. Advantages of the ABAX® connection Tool-free connection to all ®RasterPlan systems in seconds. Positive locking and securing by simply hooking in and fixing the connection. Easy release and reuse thanks to tool-free removal of the locking pin. Flexibility and safety The ABAX® connection enables the ®RasterPlan tool holders to be positioned quickly and flexibly. Tool-free disassembly offers maximum flexibility and adaptability. The system is GS-tested and guarantees safe handling. Colour selection Available in aluminium and anthracite grey, the holder fits seamlessly into existing tool systems. Summary ABAX® and ®RasterPlan form a strong combination for efficient and safe tool organisation. Benefit from the easy handling and high flexibility of this system.
- Länge: 40.00
- Farbe in RAL: anthrazitgrau
- Breite: 200.00
- Höhe: 60.00
ABAX® Drill / hexagon socket holder For 14 parts Aluminium colours
ABAX® drill / hexagon socket holder: Efficient tool organisation The ABAX® drill / internal hexagon holder is a sophisticated tool organisation system that offers seamless integration with the ®RasterPlan system. With a width of 200 mm, a depth of 30 mm and a height of 35 mm in aluminium colours, this holder ensures optimum use of space. Innovative connection technology The ABAX® connection enables the ®RasterPlan tool holder to be attached without tools and in a matter of seconds. It is fully compatible with all Kappes products that have ®RasterPlan system perforations. Easy handling and safety The ABAX® connection is secured by simply hooking it in and fixing it, followed by pressing the locking pin. To release the connection, simply pull out the locking pin without using tools, allowing it to be used again. Versatile application possibilities Thanks to the flexibility of the ABAX® connection, ®RasterPlan tool holders can be positioned quickly and flexibly. This enables customised adaptation to your specific requirements. Colour selection and assembly Available in the order colours aluminium and anthracite grey, the system offers tool-free assembly and simple, safe handling. Quality and safety The GS-tested tool holder system guarantees the highest quality and safety. ABAX® and ®RasterPlan represent a strong, reliable connection for your workshop.
- Länge: 40.00
- Farbe in RAL: alufarben
- Breite: 390.00
- Höhe: 60.00
ABAX® Screwdriver holder For 6 parts Anthracite grey
ABAX® screwdriver holder for 6 parts The ABAX® screwdriver holder is an innovative solution for the efficient organisation of tools. Measuring 200 mm wide x 30 mm deep x 40 mm high in anthracite grey, it offers a compact and stylish storage option. Compatibility and expandability The ABAX® connection enables tool-free integration in seconds with all Kappes products that use the ®RasterPlan system perforation. This ensures that your tools stay securely and firmly in place while maintaining flexibility for easy repositioning. Simplicity and safety Positive locking and securing is achieved by simply hooking and securing the ABAX® connection. The connection is secured by pressing on the locking pin. If necessary, the locking pin can be pulled out without tools to release and reuse the connection. Advantages for the user Two order colours: Aluminium colours and anthracite grey Tool-free assembly for easy handling Maximum flexibility thanks to tool-free disassembly GS-tested tool holder system for maximum safety Conclusion The ABAX® system offers a strong connection with the ®RasterPlan and is the ideal choice for users who value flexibility and safety.
- Länge: 40.00
- Farbe in RAL: anthrazitgrau
- Breite: 390.00
- Höhe: 60.00
ABAX® Horizontal spanner holder For 8 spanners Aluminium colours
ABAX® spanner holder: Technical specifications The ABAX® spanner holder is specially designed for the horizontal storage of 8 spanners. It measures 130 mm in width, 150 mm in depth and 50 mm in height. The surface is aluminium-coloured. Innovative compatibility The ABAX® connection offers seamless and tool-free integration with the ®RasterPlan tool holders. This connection enables fastening to all Kappes products equipped with the ®RasterPlan system perforation in a matter of seconds. Safety mechanism A secure hold is guaranteed by hooking in and then fixing the ABAX® connection. The connection is additionally secured by pressing on the locking pin. For easy disassembly, the locking pin can be pulled out without tools, allowing the connection to be reused. Flexibility and efficiency The ABAX® spanner holder offers maximum flexibility thanks to its tool-free disassembly. This allows the ®RasterPlan tool holders to be repositioned quickly and flexibly. Colour selection and assembly The holder is available in two colours: aluminium and anthracite grey. Assembly is carried out without tools, which guarantees simple and safe handling. Quality and safety The system is GS-tested and therefore offers the highest safety standards for industrial users.
- Länge: 160.00
- Farbe in RAL: alufarben
- Breite: 130.00
- Höhe: 60.00
ABAX® Vertical ring spanner holder For 10 keys Aluminium colours
ABAX® ring spanner holder, vertical The ABAX® ring spanner holder is specially designed to hold up to 10 spanners and offers a compact design with the following dimensions: Width 225 mm, depth 50 mm and height 255 mm. Available in aluminium colour, it integrates seamlessly into any workshop environment. Innovative compatibility The ABAX® connection enables tool-free integration in seconds with all Kappes products that have ®RasterPlan system perforations. This innovative extension of the well-known ®RasterPlan tool holders ensures maximum flexibility and efficiency. Easy handling Positive locking and securing is achieved by hooking in and fixing the ABAX® connection and pressing on the locking pin. If necessary, the connection can be released and reused without tools by simply pulling out the locking pin. Advantages for the user Tool-free assembly for quick and easy installation. Maximum flexibility thanks to tool-free disassembly. Available in two order colours: Aluminium colours and anthracite grey. GS-tested tool holder system for maximum safety. Conclusion With ABAX® and ®RasterPlan, you have a strong connection that allows you to organise your tools flexibly and efficiently. Benefit from the easy handling and robust design of this system.
- Länge: 60.00
- Farbe in RAL: alufarben
- Breite: 225.00
- Höhe: 255.00
ABAX® Storage bin holder For 5 bins of bin size 7 and 8 Aluminium colours
ABAX® storage bin holder for efficient warehouse organisation The ABAX® storage crate holder is specially designed to hold five crates of crate sizes 7 and 8. With a width of 525 mm and a height of 38 mm in an elegant aluminium colour, it offers an efficient solution for warehousing. Innovative compatibility with ®RasterPlan The ABAX® connection offers seamless and tool-free integration with ®RasterPlan tool holders. This connection enables quick and secure attachment to all Kappes products with ®RasterPlan system perforations. Easy handling and flexibility Positive locking and securing is achieved by hooking in and fixing the ABAX® connection. The connection is secured by pressing on the locking pin. Disassembly is just as easy by pulling out the locking pin without tools. This flexibility allows the tool holders to be repositioned quickly. Advantages for the user Tool-free assembly and disassembly Maximum positioning flexibility Two order colours: Aluminium colours and anthracite grey GS-tested tool holder system The combination of ®RasterPlan and ABAX® offers a robust and versatile solution for industrial storage organisation.
- Länge: 25.00
- Farbe in RAL: alufarben
- Breite: 550.00
- Höhe: 60.00
ABAX® Vertical spanner holder For 10 spanners Anthracite grey
ABAX® Vertical spanner holder The ABAX® spanner holder offers space for 10 spanners and measures 145 mm in width, 50 mm in depth and 220 mm in height. It is available in anthracite grey and is part of the ®RasterPlan tool holder system. Innovative compatibility The ABAX® connection enables tool-free integration in seconds with all Kappes products that have ®RasterPlan system perforations. This offers a seamless extension of the well-known ®RasterPlan tool holders. Safe and flexible handling Positive locking and securing is achieved by hooking in and fixing the ABAX® connection, followed by pressing on the locking pin. If necessary, the connection can be released and reused simply by pulling out the locking pin, allowing for high flexibility and quick repositioning. Advantages for users Tool-free assembly and disassembly Simple and safe handling Maximum flexibility thanks to tool-free disassembly GS-tested tool holder system Colour options Available in two order colours: Aluminium colours and anthracite grey. ABAX® and ®RasterPlan - a strong combination for your workshop organisation!
- Länge: 50.00
- Farbe in RAL: anthrazitgrau
- Breite: 155.00
- Höhe: 220.00
ABAX® Combination holder 2-piece Length 150 mm x width 55 mm Aluminium colour
Product description: ABAX® combination holder The ABAX® combination holder, consisting of two parts with a length of 150 mm and a width of 55 mm in aluminium colours, offers an innovative solution for extending the well-known ®RasterPlan tool holders. This holder enables a tool-free connection in seconds with all Kappes products that have the ®RasterPlan system perforation. Advantages of the ABAX® connection Fast and flexible positioning of ®RasterPlan tool holders Tool-free assembly and disassembly Easy release and reuse by pulling out the locking pin Maximum flexibility of use Safety features Once the ABAX® connection has been hooked in, it is locked and secured by fixing it and pressing on the locking pin. This method ensures safe handling and is GS-tested. Colour options Aluminium colours Anthracite grey ABAX® and ®RasterPlan offer a strong and reliable connection for your tools. Experience the benefits of a flexible and secure tool holder system.
- Länge: 160.00
- Farbe in RAL: alufarben
- Breite: 55.00
- Höhe: 60.00
ABAX® coil holder Up to a centre distance of 17 mm Aluminium colours
ABAX® coil holder The ABAX® bobbin holder offers an innovative solution with a centre distance of up to 17 mm wide and a maximum diameter of 78 mm. The aluminium colour design fits seamlessly into existing systems. Innovative connection technology The ABAX® connection enables tool-free integration of the ®RasterPlan tool holder into the ®RasterPlan system perforation from Kappes in a matter of seconds. Positive locking and securing is achieved by simply hooking in and fixing the ABAX® connection, followed by pressing on the locking pin. Tool-free flexibility The ABAX® connection can be released and reused without tools by simply pulling out the locking pin. This enables quick and flexible positioning of the ®RasterPlan tool holders. Advantages for the user Simple and safe handling Maximum flexibility thanks to tool-free disassembly GS-tested tool holder system Available in two order colours: Aluminium colours and anthracite grey Conclusion ®RasterPlan and ABAX® form a strong combination for industrial applications that impress with their flexibility and ease of use.
- Länge: 180.00
- Farbe in RAL: alufarben
- Breite: 55.00
- Höhe: 60.00
ABAX® 1-fold storage box holder For 1 box of box sizes 7 and 8 Aluminium colours
ABAX® 1-fold storage bin holder The ABAX® storage box holder is specially designed to hold a size 7 and 8 box in aluminium colours. This holder is an innovative extension of the proven ®RasterPlan tool holder, which is fully compatible. Technical features and advantages Seamless integration: The ABAX® connector enables the ®RasterPlan tool holder to be connected to all Kappes products that have a ®RasterPlan system perforation without tools and in a matter of seconds. Secure fastening: Once hooked in, fixing is achieved by the ABAX® connection and pressing on the locking pin, which ensures a secure and stable connection. Easy disassembly: The ABAX® connection can be released and reused without tools by simply pulling out the locking pin, which offers a high degree of flexibility. Colour options and flexibility Available in two order colours: Aluminium colours and anthracite grey. Maximum flexibility thanks to tool-free assembly and disassembly. Quality and safety GS-tested tool holder system: guarantees the highest safety standards. Experience the powerful combination of ®RasterPlan and ABAX® for efficient and flexible workshop organisation.
- Länge: 20.00
- Farbe in RAL: alufarben
- Breite: 55.00
- Höhe: 60.00
Tool storage for workshop and company
A tidy workshop is the basis for efficient work. The tool storage category offers systems for storing tools, accessories and small parts clearly and within easy reach. Thanks to their modular design and hard-wearing materials, the products suit trade businesses, workshops and industrial workplaces. The range includes perforated panels (pegboards) and slotted panels, tool holders, boltless shelving and storage bins.
Storing tools clearly – with a system
Tool organisation is based on sturdy perforated and slotted panels that can be mounted directly on walls or on workbench uprights. They are available in different sizes and colours, are made of sheet steel with an impact- and scratch-resistant plastic coating and can be fitted individually with suitable holders. You can get started particularly quickly with ABAX® perforated panel sets, which already come with holders. This way, a functional workstation is created with just a few components.
Storing small parts in order
For screws, wall plugs and other consumables, plastic storage bins are suitable; they can be stacked and hung on perforated or slotted panels. Combined with labels and wall panels, they allow clear sorting and quick access. Metal boltless shelving also offers additional storage space. It is plugged together instead of screwed and can be adapted when storage requirements change.
From the wall to the mobile workstation
Workbench uprights and wall rails extend the possible uses of tool storage. Instead of a rigid wall installation, a mobile system can also be used directly at the workstation, for example with RasterMobil. With the LogoChart® system, visual aids and tools can be combined – for teamwork, training or structured workplaces.
Solutions for more order
With the tool storage products in the Traydon shop you create order and a clear working environment. Whether a single perforated panel or a complete set – a few elements are enough for a structured storage solution that can be extended at any time.