Skip to main content Skip to search Skip to main navigation

30/09/2026

High-lift stacker: manual vs. semi-electric vs. electric

Manual, semi-electric or electric? High-lift stackers raise pallets to racking or working height, making them a compact alternative to a forklift. The key difference between the designs is what is done by muscle power and what a motor takes over. This comparison sets the three drive types side by side using qteck models and shows which design suits which job. You will find the full range under lifting devices and gear. This article is a selection guide – the manufacturer's operating instructions apply for use and inspection.

The differences at a glance

All values come from the manufacturer's data for our products. All four models have a lifting range of 90 to 2500 mm and a fork length of 1150 mm.

Criterion Manual Semi-electric Electric
Model qteck HHM1000/2500 qteck HSE 1500/2500 qteck HME 1000/2500 and HME 1500/2500
Lifting hydraulic pump by hand or foot, Speed-Lift electric electric
Travel by hand by hand electric, up to 4.0 km/h
Max. load capacity 1000 kg 1500 kg 1000 kg or 1500 kg
Fork spread / load centre 550 mm / 500 mm 550 mm / 500 mm 570 mm / 600 mm
Net weight 263 kg 378 kg 533 kg (HME 1500/2500)
Wheels nylon, steering wheels braked nylon PU, drive wheel Ø250x75 mm
Power no battery needed integrated charger battery 24V/120Ah, charger for 230V
qteck® HSE 1500/2500, semi-electric high lift pallet truck
In our shop: qteck® HSE 1500/2500, semi-electric high lift pallet truck

Manual: simple and no power needed

With the qteck® HHM1000/2500, manual high lift pallet truck, you raise the load using a hydraulic pump, operated either by hand or by foot. According to the manufacturer, the Speed-Lift function almost doubles the lifting speed for loads up to 200 kg. A safety and overload valve protects the hydraulics. Free lift is up to approx. 400 mm.

The advantage: no battery, no charging and a low net weight of 263 kg. The drawback: every lift takes effort. If you stack high often, you will feel it over the course of the day.

Semi-electric: lift electrically, push by hand

The qteck® HSE 1500/2500, semi-electric high lift pallet truck takes the pumping off your hands: lifting is electric, travel is by hand. At 1500 kg it has a higher load capacity than the manual model. The charger is integrated and included in the delivery.

This design suits operations with frequent lifting but only short travel distances. Bear in mind that pushing a heavy load by hand takes effort with a machine weighing 378 kg, especially on uneven floors.

Electric: lifting, lowering and travel by motor

The pedestrian stackers qteck® HME 1000/2500, electric high lift pallet truck and qteck® HME 1500/2500, electric high lift pallet truck lift, lower and travel electrically. According to the manufacturer: travel motor 0.75 kW, lift motor 2.0 kW, lifting speed 0.10-0.20 m/s and lowering speed 0.10-0.12 m/s, each depending on load. The maintenance-free batteries are charged via the integrated charger from a 230V socket.

With this design, motors do the lifting, lowering and travelling, so the operator neither pumps nor pulls the load by hand. The product data give no figure for operating time per battery charge. In return the machine is heavier, 533 kg for the HME 1500/2500, and the battery needs regular charging.

Which design for which job?

Small warehouse or workshop with occasional stacking

If only a few pallets a day are lifted onto a rack, a manual stacker is often enough. It is ready to use at once and needs no charging point.

Warehouse with many lifts over short distances

If goods-in and racking are close together but stacking happens often, a semi-electric machine eases the lifting without the need for a travel drive.

Production and truck unloading with many trips

If pallets are moved over longer distances and lifted often, for example between goods-in, warehouse and production, the electric stacker is an option. According to the manufacturer it is also suitable for loading and unloading trucks and containers. Check the local conditions such as ramp and dock leveller for this.

Frequently asked questions

What does load centre mean?

The stated load capacity refers to a specific load centre distance: 500 mm for the manual and semi-electric models, 600 mm for the electric ones. How the permissible load changes with a different load position or lift height is set out in the operating instructions.

Do I need a separate charging station for an electric stacker?

Not for the electric models shown: the charger is integrated and charging is done from a 230V socket.

Which stacker carries the most?

The semi-electric HSE 1500/2500 and the electric HME 1500/2500 are rated at 1500 kg, the manual model and the HME 1000/2500 at 1000 kg.

How to make your choice

  1. Count how often a day you lift and how long the routes are.
  2. Check the weight and size of your pallets against load capacity and load centre.
  3. Measure the lift height you need and the clearance heights in your building.
  4. Check whether there is a socket for charging nearby.

You will find all machines under lifting devices and gear. If you have questions, call us on +49 2237 628095-00, Monday to Friday from 9 am to 5 pm. The manufacturer's operating instructions always apply for use, instruction and inspection.