Skip to main content Skip to search Skip to main navigation

16/09/2026

PP coverall vs. chemical protective coverall: which protection for what?

PP coverall or chemical protective coverall? At first glance they look alike: a white one-piece suit, hood and zip. The difference lies in the material and in the standards a coverall has been tested to. This comparison shows when a simple polypropylene coverall is enough and when it has to be a certified chemical protective coverall. You will find all models in the protective overalls category. This article is a selection guide – the manufacturer's operating instructions apply for use and inspection.

The differences at a glance

The data comes from the manufacturer's information for our products. We compare the NITRAS PP coveralls with the NITRAS PROTECT.

Criterion PP coverall Chemical protective coverall
Example NITRAS PP, white or royal blue NITRAS PROTECT, white
Material 100% polypropylene SMS / laminate film, 50% polypropylene and 50% polyethylene
Standards per manufacturer no protection standard stated in the product data EN ISO 13688, EN ISO 13982-1, EN 13034, EN 1149, EN 14126, EN 1073-2
Closure full-length zip with cover flap zip with double cover flap and adhesive strip
Fit elastic at waist, hood, cuffs and ankles three-piece hood with elastic, elastic at waist, cuffs and ankles, three-piece crotch gusset
Comfort breathable, comfortable to wear breathable, low-linting, tear-resistant
Sizes white M to 3XL, royal blue L to 3XL M as well as L to 3XL
Typical use jobs for which no protection standard is required work with particles and splashes where a standard is required
NITRAS PP, protective coverall, royal blue
In our shop: NITRAS PP, protective coverall, royal blue

What the PP coverall does

The manufacturer describes polypropylene as a light, breathable material, and the coverall is meant to be comfortable to wear. According to the product data, elastic at the waist, hood, sleeve and leg cuffs gives a better, snug fit. The full-length zip with cover flap makes it easy to put on and take off.

The NITRAS PP, protective coverall, white comes in sizes M to 3XL. The NITRAS PP, protective coverall, royal blue is available in L to 3XL. The coloured version can help you tell areas or teams apart at a glance.

What matters is what the product data does not say: no chemical protection standard is stated for the PP coveralls. They are therefore not intended for work where tested protection against chemicals is required. According to the care label they are neither washed nor dry-cleaned.

What the chemical protective coverall adds

The NITRAS PROTECT, protective coverall, white, EN ISO 13688, EN ISO 13982-1, EN 13034, EN 1149, EN 14126, EN 1073-2 is made of SMS and laminate film. According to the manufacturer, this combination is tear-resistant yet breathable. The double zip cover with adhesive strip and the three-piece crotch gusset improve tightness and freedom of movement.

The standards are what count. The manufacturer lists:

  • EN ISO 13688: general requirements for protective clothing.
  • EN ISO 13982-1, Type 5-B: protective clothing against solid particles.
  • EN 13034, Type 6-B: limited protection against liquid chemicals, such as splashes.
  • EN 1149: electrostatic properties.
  • EN 14126: protection against infective agents.
  • EN 1073-2, Class 1: protection against radioactive contamination by particles.

Which of these properties you need follows from your risk assessment and the safety data sheets of the substances being handled. The exact limits of use are given in the manufacturer's information.

Which coverall for which job?

The basic rule is simple: where the risk assessment does not call for tested protection, the PP coverall can be enough. Where there is a hazard from particles, splashes or infective agents and tested protection is required, you need the certified coverall.

Simple jobs in the warehouse

When clearing out old racking areas or moving stock, a PP coverall is worn over work clothes if no protection to a standard is required for the job. With its full-length zip it is quick to put on.

Workshop with a splash risk

When liquids are decanted, parts are cleaned or surfaces are treated in the workshop, splashes can occur. If the risk assessment calls for a protective suit to EN 13034, the PROTECT coverall is the right choice, combined with suitable gloves and eye protection.

Production and visitors

Simple coveralls are often an option for visitors or service staff in production areas. If the risk assessment does not call for tested protection, a PP coverall can be enough. If there are hazards from substances, however, the risk assessment decides which type is needed.

What to watch when wearing a coverall

  • Size: Choose a coverall that lets you bend and stretch without the seams pulling. A coverall that is too tight tears more easily.
  • Interfaces: Pay attention to where the suit meets gloves, footwear and respiratory protection. The finish at the sleeves and legs in particular decides how well it protects.
  • Visual check: Check the coverall for tears and damaged seams before every use.
  • Taking it off: Remove a soiled coverall so that the outside does not touch skin or clothing.

Frequently asked questions

Can I use a PP coverall as chemical protection?

No, not where tested chemical protection is required. The product data for the PP coveralls names no chemical protection standard. In that case, choose a coverall certified to the required standards.

What do Type 5 and Type 6 mean?

Type 5 stands for protective clothing against solid particles to EN ISO 13982-1, Type 6 for limited protection against liquid chemicals to EN 13034. According to the manufacturer, the NITRAS PROTECT is tested to both types.

Can the coveralls be washed?

According to the care label of the PP coveralls, no: do not wash, do not bleach, do not tumble dry, do not iron, no dry cleaning. For the PROTECT, the manufacturer's information applies.

How to choose the right coverall

  1. Clarify what needs protecting against: whether tested protection against particles, splashes or infective agents is required at all.
  2. Check which standards your risk assessment requires.
  3. Compare material, closure and sizes in the product data.
  4. Plan gloves, footwear and respiratory protection at the same time so the interfaces fit.

You will find all models under protective overalls. If you have questions, call us on +49 2237 628095-00, Monday to Friday from 9 am to 5 pm. The manufacturer's operating instructions always apply for use and inspection.