How high does a manual high-lift stacker need to lift? The answer is not in the catalogue but in your warehouse: rack height, pallet height, door height and the weight of the load determine which model fits. Manual high-lift stackers lift by pumping, without a battery or charger. In our manual high-lift pallet truck category you will find models with lift heights from 1200 mm to 3000 mm. This guide shows you how to choose the right lift height.
The models at a glance
All values come from the product data of the qteck high-lift stackers. All five models share a fork length of 1150 mm, a fork width of 550 mm, an overall length of 1700 mm and a Speed-Lift pump.
| Model | Load capacity | Lift range | Overall height | Dead weight |
|---|---|---|---|---|
| HHM500/1200 | 500 kg | 90 to 1200 mm | 1690 mm | 165 kg |
| HHM1000/1550 | 1000 kg | 90 to 1550 mm | 1985 mm | 190 kg |
| HHM1000/2500 | 1000 kg | 90 to 2500 mm | 1845 mm | 263 kg |
| HHM1500/2500 | 1500 kg | 90 to 2500 mm | 1845 mm | 265 kg |
| HHM1000/3000 | 1000 kg | 90 to 3000 mm | 2090 mm | 280 kg |
The information on the respective product page is decisive. The overall height is the height of the unit in its lowered position, i.e. the dimension that has to fit under doors and gates.

How to work out the lift height you need
- Measure the highest shelf: measure the top edge of the highest beam or shelf you want to serve with the unit.
- Allow clearance: the forks have to lift the pallet above the beam before setting it down. So allow some clearance above the shelf.
- Compare with the lift range: the upper limit of the lift range must be above this value. A reserve does no harm, as racks are often rebuilt later.
- Check the lower limit: according to the product data, all models start at 90 mm. Check whether your pallets and load carriers allow this entry height.
If you only feed workbenches, machines or a truck bed, a low lift height is often enough. For racks with several levels, you need correspondingly more.
Overall height, free lift and passageways
Besides the lift height, the overall height decides where the unit can go at all. Check doors, gates, container entrances and passages under pipes or mezzanines.
- Overall height: according to the product data, it ranges from 1690 mm for the HHM500/1200 to 2090 mm for the HHM1000/3000. Notably, the models with a 2500 mm lift height are lower, at 1845 mm, than the model with 1550 mm, according to the product data. So it pays to check the data rather than infer the overall height from the lift height.
- Free lift: for the HHM1000/2500, HHM1000/3000 and HHM1500/2500, the product data states a free lift of up to approx. 400 mm. Free lift is the range in which the forks rise without the unit getting taller. This helps with low ceilings.
Mind the load capacity and load centre
The load capacity always applies to a specific load centre. For the HHM500/1200 and the 1000 kg models, the product data states 500 mm; for the HHM1500/2500 it is 400 mm. If the centre of gravity of your load sits further forward on the forks, the stated load capacity no longer applies in full. In that case, the manufacturer's information in the operating instructions determines the permissible load.
According to the manufacturer, the Speed-Lift pump almost doubles the lift per pump stroke for loads up to approx. 200 kg. This saves time with light pallets. The units are operated by hand or foot. A safety and overload valve protects the hydraulic pump.
Typical applications
Workshop and production with low shelves
Material is lifted onto workbenches, machine tables or a low rack. For loads up to 500 kg and heights up to 1200 mm, the HHM500/1200 fits, with the lowest overall height and the lowest dead weight in the range.
Warehouse with several rack levels
Pallets are stored on upper levels. Here, the HHM1000/2500, HHM1500/2500 or HHM1000/3000 come into question. Choose according to the highest shelf and the heaviest pallet you place there.
Frequently asked questions
Can I load a truck with a manual high-lift stacker?
The product texts name loading and unloading vehicles as an application. Whether it works in your case depends on the ramp, the height of the loading floor and the ground. Clarify the conditions on site.
Is more lift height always better?
Not necessarily. In our examples, more lift height also means more dead weight. Choose the lift height you really need, plus a sensible reserve.
What do I need to check before every use?
Check forks, wheels, hydraulics and brakes for damage and leaks. The inspections required in detail are set out in the manufacturer's operating instructions.
The high-lift stackers in our shop
This article is a selection guide – the manufacturer's operating instructions apply for use and inspection.
- qteck® HHM500/1200, manual high lift pallet truck
- qteck® HHM1000/1550, manual high lift pallet truck
- qteck® HHM1000/2500, manual high lift pallet truck
- qteck® HHM1500/2500, manual high lift pallet truck
- qteck® HHM1000/3000, manual high lift pallet truck
All models are shown in the manual high-lift pallet truck category. We are happy to advise you: +49 2237 628095-00, Monday to Friday from 9 am to 5 pm.