Skip to main content Skip to search Skip to main navigation

23/09/2026

Hybrid pallet vs. all-plastic pallet: Ecolite ER-87.2 and TIDUS compared

Hybrid pallet or all-plastic pallet? Both are built for heavy loads, but in very different ways. The Ecolite ER-87.2 combines a steel deck and runners with plastic legs. The heavy-duty pallets in the TIDUS range are made entirely of recycled plastic. This comparison shows where the strengths of each design lie and which pallet suits which use. You will find the all-plastic models in the heavy pallets category.

The differences at a glance

All values come from the manufacturer's data for our products. Where a figure is missing, we say so rather than estimate.

Criterion Ecolite ER-87.2 (hybrid) TIDUS Heavy 1208 3R TIDUS smart heavy 1208 TIDUS heavy 1208 3R N
Design steel deck and runners, plastic legs all plastic, three closed runners all plastic with runners all plastic, three nestable longitudinal runners
Dimensions 1200 x 800 x 146 mm 1200 x 800 x 160 mm 1200 x 800 x 160 mm 1200 x 800 x 160 mm
Net weight 24 kg 16.5 kg 18.5 kg 16.5 kg
Load per manufacturer nominal load 2,650 kg static 5,000 kg, dynamic 2,000 kg static 6,500 kg, dynamic 1,500 kg static 2,000 kg, dynamic 1,000 kg
Racking not stated in the product data 1,000 kg 1,000 kg 1,000 kg
Deflection 4 mm at maximum load not stated not stated not stated
Material steel and plastic recycled PE-PP recycled PP/PE recycled PE-PP
Empty stacking not stated not stated not stated nestable

A note on reading the table: the Ecolite states a nominal load, while the TIDUS models give separate values for static, dynamic and racking loads. The figures therefore cannot be compared one to one. Before buying, clarify which type of load applies to your use.

Heavy-duty plastic pallet heavy, 1200x800x160 mm, TIDUS smart heavy 1208
In our shop: Heavy-duty plastic pallet heavy, 1200x800x160 mm, TIDUS smart heavy 1208

What sets the hybrid design apart

On the Ecolite model ER-87.2 Hybrid pallet 1200x800x146 mm, a steel deck and steel runners carry the load, while the legs are made of plastic. The manufacturer states a nominal load of 2,650 kg and a deflection of 4 mm at maximum load. The product data give no deflection figure for the TIDUS models, so a direct comparison on this point is not possible.

The price of the steel content is weight: at 24 kg, the Ecolite is the heaviest pallet in this comparison. If you move many pallets by hand or have to keep a close eye on the total weight in the vehicle, take that into account. At 146 mm it is also slightly lower than the TIDUS models at 160 mm.

What sets the all-plastic pallets apart

The TIDUS heavy-duty pallets are lighter and explicitly state values for racking. Depending on the model, they have different strengths:

All three TIDUS models are rated at 1,000 kg in racking and are made of recycled plastic.

Which pallet for which use?

High-bay warehouse

When pallets sit on beams in the racking, the racking value is what counts. For the TIDUS models it is given as 1,000 kg. The product data for the Ecolite gives no racking value, so check in advance whether the pallet is approved for your racking support.

Production with heavy, sensitive components

When a load must not bend, for example components that rely on a flat base, the stated deflection figure of the Ecolite helps with planning. For the TIDUS models, ask the manufacturer for this figure before you decide.

Conveyor systems and truck return trips

On roller and chain conveyors, pallets with closed runners run smoothly, which suits the TIDUS Heavy 1208 3R. If empty pallets have to go back by truck, the nestable TIDUS heavy 1208 3R N saves load space because the pallets stack inside one another.

What may speak against each design

  • Hybrid pallet: higher net weight, and the product data gives no figures for racking or dynamic load.
  • All plastic: the product data gives no deflection figure. Load values vary considerably by model, so the model has to match the type of load.

We deliberately make no blanket statements about service life or cost-effectiveness. They depend on your application, your number of trips and your storage equipment.

Frequently asked questions

What is a hybrid pallet?

A pallet that combines different materials. On the Ecolite ER-87.2, the deck and runners are steel and the legs are plastic.

Can I compare the Ecolite's nominal load with the static load of the TIDUS?

Not directly. The load types are stated differently. What matters is how the pallet is loaded in your operation: on the floor, while being moved by forklift or in the racking.

Which TIDUS is suitable for racking?

According to the manufacturer, all three TIDUS models shown are rated at 1,000 kg in racking. Also check the requirements of your racking manufacturer.

How to make your choice

  1. Determine the type of load: floor, vehicle or racking.
  2. Check whether deflection matters for your goods.
  3. Factor in the net weight if pallets are moved by hand.
  4. Clarify whether empty pallets need to be returned in a space-saving way.

You will find the TIDUS models under heavy pallets. We are happy to advise you on the Ecolite ER-87.2 and any other questions: +49 2237 628095-00, Monday to Friday from 9 am to 5 pm.