Which work glove suits which task? In a single day in the warehouse, hands reach for cartons, pallets, film, tools and sometimes cleaning agents or operating fluids. There is no one glove for everything. This guide matches the common glove types to typical warehouse tasks and shows examples from our hand and arm protection range. This article is a selection guide – the manufacturer's operating instructions apply for use and inspection.
First the task, then the glove
The right choice starts at the workstation, not in the catalogue. Look at what your staff actually handle and for how long. Three questions help you sort it out:
- What is the hazard? Abrasion and rubbing on rough surfaces, sharp edges on sheet metal or strapping, contact with liquids or chemicals.
- How much dexterity does the job need? Anyone peeling labels, operating a scanner or picking small parts needs a thin, close-fitting glove. Anyone moving heavy, rough loads mainly needs durability.
- How long is the glove worn? When gloves are worn all day, fit and comfort matter as much as protection. A glove that gets in the way ends up being taken off.
In every company the basis for the selection is the risk assessment. It defines which risks people must be protected against. The pairings below help you translate those requirements into suitable glove types.

Which glove type for which task?
The five types below cover most warehouse jobs. For each type we name a model from the shop together with the manufacturer's data.
- Picking, scanning, light assembly: A knitted glove coated on the palm and fingertips combines grip with dexterity. One example is the NITRAS nylon gloves, grey / grey, EN 388: nylon with a grey PU coating, knitted cuff, certified to EN 388 with the code 4131X, size range 06 to 11.
- Light, clean work: Where there is hardly any mechanical hazard, such as sorting clean goods, a simple textile glove is often enough. The NITRAS cotton jersey gloves, natural colour are uncoated, half-bleached, brushed on the inside and can be worn on either hand; they are offered in size 10.
- Heavy loads, wooden pallets, rough edges: For goods-in with wood, stone or metal parts, a leather glove is the classic choice. The NITRAS APOLLO, cowhide leather gloves, natural colour / grey, EN 388 have a lined cowhide palm, a cotton back, a canvas cuff and double stitching; EN 388 code according to the manufacturer 3133X, size range 08 to 12.
- Sheet metal, glass, strapping, box cutters: Where cuts are a risk, a cut protection glove belongs on the hand. The NITRAS CUT3, cut protection gloves, grey / black, EN 388 are made of grey special yarn with a black PU coating on the palm and fingertips; EN 388 code 4X31B, size range 06 to 11.
- Cleaning agents and operating fluids: Contact with liquids calls for a chemical protection glove. The NITRAS GREEN BARRIER, chemical protection gloves, green, EN 388, EN ISO 374 are made of green nitrile, 33 cm long with a flocked lining, size range 07 to 11.
We cover nitrile, cut protection, chemical protection and leather in separate articles. Here the only question is which type belongs where.
Typical applications at work
Many workstations need more than one glove type. Two examples show what a sensible split can look like.
Order picking and dispatch in the warehouse
When orders are put together, cartons, film and scanners alternate. A coated knitted glove keeps a grip on the carton and leaves enough feel for keyboard and label. If staff also cut strapping or open boxes with a knife, a cut protection glove should be close at hand for that step. That keeps the glove for the main job light, while the risk of the side task is still covered.
Goods-in, truck unloading and workshop
When unloading wooden pallets, mesh boxes or steel parts, hands are exposed to rough edges and splinters. A leather glove with a cuff protects the wrist as well. In the workshop, where vehicles or equipment are cleaned and fluids are topped up, a chemical protection glove is added. The substances used there are listed in the safety data sheet of each product, and that is what decides whether the chosen glove is suitable.
What the marking on the glove tells you
Protective gloves carry pictograms and standard references. They help with comparison but do not replace a check at your own workstation.
- EN 388: This standard covers mechanical risks. The code made up of digits and letters, such as 4131X on the nylon gloves or 4X31B on the CUT3, gives the results of the individual tests. The manufacturer's information for each model explains what each position means.
- EN ISO 374: This series of standards covers protection against chemicals and micro-organisms. For the GREEN BARRIER, the manufacturer states EN ISO 374-1, Type A with the code AKLMNO, and EN ISO 374-5 with the addition VIRUS. The letters stand for the test chemicals the glove was tested against.
Important: a standard on the label tells you that a glove has passed certain tests. Whether it suits your specific substance, contact time and task is something to clarify using the manufacturer's information and the substance's safety data sheet.
Fit, size and wearing time
A glove that is too big slips and reduces feel; one that is too small pinches and tires the hand. Offer several sizes and let staff try them on. The size ranges of the models shown differ: the nylon and CUT3 gloves come in the range 06 to 11, the APOLLO leather gloves in the range 08 to 12, and the GREEN BARRIER in the range 07 to 11.
Also pay attention to the wrist finish. A knitted cuff fits snugly and keeps dirt out, while a gauntlet cuff also protects the lower forearm. With chemical protection, length matters so that no liquid runs into the glove. Check gloves for tears, holes and worn areas before every use and replace damaged pairs.
Frequently asked questions
Is one glove type enough for the whole warehouse?
Rarely. There is usually one main job that a standard glove suits, plus a few side tasks with a higher risk. A second glove type should be within reach for those.
Does a cotton glove protect against cuts?
The product data name no test standard for the uncoated cotton jersey glove, so it is an option for work with little mechanical strain. For work with sharp edges, choose a cut protection glove with a suitable EN 388 code.
When do I need a chemical protection glove?
As soon as hands may come into contact with cleaning agents, oils or other chemicals. Which glove is suitable follows from the substance's safety data sheet and the glove manufacturer's data.
How to find the right glove
- List the tasks at each workstation and assign the main hazard to each task.
- Choose one glove type per hazard from the overview above.
- Compare marking, material and size range in the product data.
- Let staff wear-test the gloves before you order larger quantities.
You will find all models in the hand and arm protection category. If you have questions, call us on +49 2237 628095-00, Monday to Friday from 9 am to 5 pm. The manufacturer's operating instructions always apply for use and inspection.