The 1300 x 1100 mm format is at home in the chemical industry. Many companies know it as the CP4 chemical pallet. Anyone who has so far worked with Euro pallets or industrial pallets will sooner or later come across this size when handling sacks, drums or containers from the chemical and plastics industries. You will find plastic pallets in this format in our medium pallets category. This guide explains what to look out for when choosing one.
What CP4 and 1300 x 1100 mm stand for
CP stands for chemical pallet. The designation CP4 describes a format 1300 mm long and 1100 mm wide. It is larger than both the Euro pallet and the industrial pallet and therefore cannot simply be swapped for them.
For your operation, this means: if suppliers or customers work with the CP4 format, rack bays, conveyor systems, vehicles and storage areas all have to fit this size. So check the dimensions before switching, at every point where the pallet will later stand or travel.
Three plastic pallets in the 1300 x 1100 mm format
Our shop carries three models from the TIDUS range by Purus in this format. The values come from the product data.
- TIDUS medium 1311 3R as CP4 chemical pallet: 1300 x 1100 x 150 mm, 13.3 kg, static load 5,000 kg, dynamic 1,250 kg, racking 500 kg. Made of recycled PE-PP, 4-way entry, impact-resistant all-round protection. The data lists an anti-slip edge and runners as options.
- TIDUS medium 1311 3R: 1300 x 1100 x 150 mm, 14.6 kg, static load 5,000 kg, dynamic 1,250 kg, racking 750 kg. Made of recycled PE-PP, closed top deck, 4-way design. According to the product text, intended for high-bay warehouses, conveyor systems and internal transport.
- TIDUS heavy 1311 3R: 1300 x 1100 x 160 mm, 20 kg, static load 7,000 kg, dynamic 2,000 kg, racking 1,000 kg. Made of recycled PP, open deck, sturdy runners.
The two medium models share the same type designation, but the product data shows differences in weight and racking value. So when ordering, pay attention to the article number and the values on the respective product page.
What to look for in chemical pallets
Load capacity to match the use: distinguish between three load cases: static, when the pallet stands on a firm, level floor; dynamic, when it is moved loaded by forklift or pallet truck; and racking, when it rests on beams. The racking value is the lowest of the three for all models. It decides whether a load may go into the rack.
Deck and surface: the TIDUS heavy 1311 3R has an open deck. According to the product text, this makes cleaning easier and it does not absorb liquids. The TIDUS medium 1311 3R with article number TR-16867-SCH has a closed top deck. Which surface suits you better depends on your goods. If you handle hazardous substances or sensitive products, please clarify the requirements before ordering.
Runners, entry and stretch film: for the TIDUS heavy 1311 3R, the product text describes sturdy runners. For the two medium pallets, the product text also mentions runners, but the technical data lists runners under the options – check before ordering which version you will receive. For the two medium pallets, the product data states a 4-way design. For all three models, the product text describes them as suitable for stretch film, an advantage when you wrap containers on the pallet.
Medium or heavy?
This question mainly comes up with heavy containers and in racking.
- Medium is enough if your dynamic load stays below 1,250 kg and a racking value of 500 kg or 750 kg is sufficient. The pallets are lighter and therefore easier to handle.
- Heavy makes sense if you move up to 2,000 kg dynamically or want to put up to 1,000 kg into racking. In return, the pallet weighs 20 kg and is 160 mm high.
Weigh the benefit of the higher load capacity against the extra weight in handling. If only some of your loads are heavy, you can also use both classes side by side and label them clearly.
Typical applications
Warehouse with sacks and containers from the chemical industry
A warehouse receives goods in the CP4 format and puts them into racking. Here, the racking value is what counts. A medium pallet with 750 kg or the heavy pallet with 1,000 kg in racking covers different weights. Check beforehand whether your rack bays are designed for the format.
Production in the plastics industry
In production, pallets run over conveyor systems and back and forth between stations. A plastic pallet with runners and 4-way entry is easy to pick up. Impact-resistant all-round protection helps in tough everyday use. The CP4 version of the TIDUS medium 1311 3R explicitly names this protection.
Frequently asked questions
Does a CP4 pallet fit into a rack built for Euro pallets?
Not without checking. The 1300 x 1100 mm format is larger than the Euro pallet. Measure the rack bay, the beam spacing and the passageways before you switch.
Why do two pallets with the same name have different racking values?
The product data gives 500 kg in racking for the CP4 chemical pallet and 750 kg for the second TIDUS medium 1311 3R. The models also differ in weight. The value on the respective product page is decisive.
Are the pallets made of virgin material?
No. According to the product data, the two medium models are made of recycled PE-PP and the heavy pallet of recycled PP. If your goods place special requirements on the pallet material, please clarify them before ordering.
The pallets at a glance
Here you can go straight to the three models:
- Plastic pallet CP4 chemical pallet, 1300x1100x150 mm, TIDUS medium 1311 3R
- Plastic pallet 1300x1100x150 mm TIDUS medium 1311 3R
- Heavy-duty plastic pallet heavy, 1300x1100x160 mm TIDUS heavy 1311 3R
More models are shown in the medium pallets category. We are happy to advise you: +49 2237 628095-00, Monday to Friday from 9 am to 5 pm.