Skip to main content Skip to search Skip to main navigation

04/11/2026

2-leg vs. 4-leg lifting chain sling

Two legs or four? With a lifting chain sling, the number of legs decides how many attachment points you can use on the load. Nominal size and inclination angle are just as important. Our sling chain category offers 2-leg and 4-leg versions with GS hooks. This comparison helps you narrow down the right design.

This article is a selection guide – the manufacturer's operating instructions apply for use and inspection.

The basic difference

A 2-leg chain sling has two chain legs hanging from a common master link. It is attached to the load at two points. A 4-leg chain sling has four legs and is attached at four points.

The choice starts with the load: how many suitable attachment points does it have, and where is its centre of gravity? Only then comes the question of the required load capacity.

4-leg sling chain; GS hook; NG 6-8
In our shop: 4-leg sling chain; GS hook; NG 6-8

The differences at a glance

All three chains are made by Dolezych as Dokett sling chains, comply with DIN EN 818-4 according to the manufacturer, and have grade 8 as well as end fittings with GS-DD hooks.

Criterion 2-leg, NG 8 4-leg, NG 6 4-leg, NG 8, can be shortened
Attachment points 2 4 4
Load capacity 0°–45° 2,800 kg 2,360 kg 4,250 kg
Load capacity 45°–60° 2,000 kg 1,700 kg 3,000 kg
Length per leg 1,000 mm 1,000 mm 2,000 mm
Shortening not stated not stated with VHGS chain shortening hook

The table makes one key point: more legs do not automatically mean more load capacity. According to the manufacturer, the 4-leg chain with nominal size 6 carries less than the 2-leg chain with nominal size 8.

When the 2-leg chain fits

A 2-leg chain suits loads with two suitable attachment points, such as long components, containers with two lugs or machine parts with two lifting points. It is easier to handle because only two hooks need to be attached.

Example from our range

The 2-leg sling chain; GS hook; NG 8-8 has nominal size 8, a length of 1,000 mm per leg and, according to the manufacturer, carries 2,800 kg at an inclination angle of 0° to 45° and 2,000 kg at 45° to 60°.

When the 4-leg chain fits

A 4-leg chain is intended for loads with four attachment points, such as flat, large-area parts, mesh boxes or frames. How the load is actually shared between the legs, however, depends on the centre of gravity and the position of the attachment points – the manufacturer's specifications are what counts.

Two versions in our range

The 4-leg sling chain; GS hook; NG 6-8 has nominal size 6, 1,000 mm per leg and, according to the manufacturer, carries 2,360 kg at 0° to 45° and 1,700 kg at 45° to 60°. The 4-leg sling chain; GS hook; NG 8-8; can be shortened has nominal size 8, 2,000 mm per leg and carries 4,250 kg at 0° to 45° and 3,000 kg at 45° to 60°. With the VHGS chain shortening hook it can be adapted to the task at hand, according to the manufacturer.

The inclination angle: why it matters so much

For all three chains, the manufacturer states two load capacities: one for an inclination angle of 0° to 45° and a lower one for 45° to 60°. So the larger angle range comes with the lower permissible load.

Which angle results from your slinging method, and what to observe, is set out in the manufacturer's operating instructions. For the shortenable chain, the manufacturer mentions shortening via VHGS shortening hooks, which lets the chain be adapted to specific requirements.

Typical applications

Workshop: machine part with two lugs

A gearbox or tool has two lifting lugs. A 2-leg chain is the obvious choice here, because it uses exactly two attachment points.

Warehouse: mesh box or frame

Large-area loads with four corners can be attached at every corner with a 4-leg chain. Pay attention to the load capacity at the actual inclination angle.

Production: changing loads

When parts of different sizes are lifted, a shortenable 4-leg chain is an option, which according to the manufacturer can be adjusted using shortening hooks. The permissible load capacity at the given inclination angle still applies unchanged.

Frequently asked questions

Does a 4-leg chain always carry more than a 2-leg chain?

No. Nominal size and inclination angle are decisive too. In our range, the 4-leg chain with nominal size 6 carries less than the 2-leg chain with nominal size 8, according to the manufacturer.

What does NG 8-8 mean?

For the chains marked NG 8-8, our product data lists chain nominal size 8 and grade 8; for the chain marked NG 6-8, nominal size 6 and grade 8.

Which standard are the chains made to?

According to the manufacturer, all three chains comply with DIN EN 818-4.

What should I check before use?

Before each use, carry out checks as specified in the manufacturer's operating instructions – they apply for use and inspection. The load capacities for each inclination angle are listed on the respective product page.

You will find all 2-leg and 4-leg versions in our sling chain category. If you have questions about choosing, call us on +49 2237 628095-00 (Mon–Fri, 9 am–5 pm).