Anti-slip covering from the roll or an aluminium anti-slip plate? Both make stairs, ramps and walkways safer to walk on, but they differ in construction, fixing and where they can be used. This comparison sets the ReCyGrid covering and the m2 aluminium anti-slip plates from our floor marking and floor repair category side by side and shows when each solution fits better.
The differences at a glance
The values come from the Mehlhose Antirutschprodukte manufacturer information for our products. Where the product data give no value, we say so instead of estimating.
| Criterion | ReCyGrid anti-slip covering | Aluminium anti-slip plate |
|---|---|---|
| Format | roll, 50 mm or 100 mm wide, 18.3 m long | plate, 114 mm wide, 635 mm or 1,000 mm long |
| Material | made from recycled materials | flat aluminium plate, 1.5 mm |
| Slip resistance | no class given in the product data | R13 |
| Fixing | can be applied to various surfaces, details in the technical data sheet | pre-drilled fixing holes |
| Where to use | indoors and outdoors | indoors and outdoors, also on wood, gratings and carpet |
| Durability | robust and wear-resistant according to the manufacturer | abrasion resistance of approx. 1 million footfalls according to the manufacturer |
| Shelf life | 24 months | unlimited |
The details on the relevant product page and in the technical data sheet always apply.
Anti-slip covering: flexible from the roll
The ReCyGrid covering in grey-anthracite is supplied on a roll, either 50 mm or 100 mm wide and 18.3 m long in each case. This lets you cut it to the length you need, for example for a flight of steps or a longer walkway.
According to the manufacturer, the covering is made from recycled materials and is intended for indoor and outdoor use. Its surface texture is designed for good grip. Our product data do not give a slip resistance class for the covering. If you need to prove a specific class, check this in the technical data sheet before buying.
The muted grey-anthracite colour blends unobtrusively into many floors. If you also want a warning effect, combine the covering with a coloured marking on the step edge.
Aluminium anti-slip plate: firmly fixed and hard-wearing
The m2 anti-slip plates consist of a flat, 1.5 mm aluminium plate with an anti-slip surface and are rated R13. They are fitted using pre-drilled fixing holes, which according to the manufacturer requires no specialist knowledge.
The manufacturer lists stairs, ramps, entrances, passageways and walkways, indoors and outdoors, as places of use. According to the product description, both plates also suit difficult surfaces such as wood, gratings or carpet. For the day-fluorescent plate, the description also lists surfaces smeared with oil or grease. They can also be used to repair damaged concrete or wooden surfaces.
Our selection includes the plate in yellow at 114 × 635 mm and in a day-fluorescent version at 114 × 1,000 mm. According to the manufacturer, the anti-slip surface can be replaced when it wears.
Which solution for which task?
Outdoor stairs and ramps at the workshop
On outdoor stairs and ramps exposed to wind, rain and dirt, the aluminium plate comes into its own. It is firmly fitted using fixing holes and rated R13. The yellow or day-fluorescent version also makes the step edge clearly visible.
Walkways and platforms in the warehouse
For longer walkways, platforms or many steps in one run, the covering from the roll can be more practical. It can be cut to the length you need and laid in two widths. Check in advance whether the surface is suitable for laying.
What to look for when choosing
- Surface: Gratings, wood or carpet point to the fitted plate. Both solutions are possible on smooth, solid surfaces.
- Proof: If you need a specific slip resistance class, choose a product for which this class is stated.
- Length and shape: Roll goods suit long runs, plates suit individual steps and edges.
- Visibility: Coloured plates mark the edge at the same time, the anthracite covering stays discreet.
- Inspection: Check coverings and plates regularly for wear and loose areas.
Frequently asked questions
What does R13 mean?
R13 is the slip resistance rating stated by the manufacturer for the aluminium plates. Which class is required at your location follows from your risk assessment and the requirements that apply to your site.
Can I use both solutions outdoors?
Yes, according to the manufacturer both the ReCyGrid covering and the aluminium plates are intended for indoor and outdoor use.
How long can the products be stored?
The manufacturer gives a shelf life of 24 months for the covering and an unlimited shelf life for the aluminium plates.
Browse the range
You can find the compared products directly in our shop:
- m2 anti-slip covering ReCyGrid grey-anthracite roll 50mm x 18.3 m
- m2 anti-slip covering ReCyGrid grey-anthracite roll 100mm x 18.3 m
- Anti-slip plate aluminium m2 universal yellow 114x635mm
- Anti-slip plate aluminium m2 day fluoresc. R13 114x1000mm
More products are shown in the floor marking and floor repair category. The manufacturer's details in the technical data sheet apply for fitting and surfaces. We are happy to advise you on +49 2237 628095-00, Monday to Friday from 9 am to 5 pm.